Supply chain glossary
Goods‑to‑Person (G2P)
What goods‑to‑person picking is, why order batching at the station decides how much automation a warehouse needs and which items stay outside the system.
16. november 2026
3 min

Goods‑to‑person (G2P) is an order picking method in which an automated system brings storage totes or shelf units to a fixed workstation, where the picker takes the required quantity instead of walking to the stock. Travel between locations, which in manual picking grows with the size of the warehouse, moves to the machines, and the output of the station then depends on how fast and how usefully the system presents stock.
The supply side of a G2P station can be a shuttle or miniload system, cube storage with robots running on top of the grid, autonomous mobile robots carrying shelf units, or a vertical lift module. The station combines a presentation point for the source tote with a put wall or several order positions. The warehouse management system (WMS) releases orders and keeps the stock records; the control system decides which tote travels to which station and in what sequence.
Goods‑to‑person in practice
A G2P system is sized by tote presentations per hour, and that number depends on how many order lines each presentation serves. Assume a station where the operator handles 450 order lines an hour. If the station works on one order at a time and an average tote visit serves 1.2 lines, the storage system has to bring 375 totes an hour to that station. If the station holds 12 orders at once on a put wall and the same tote serves 3 lines per visit, the requirement falls to 150 totes an hour. Across six stations that is 2,250 against 900 tote movements an hour, which is the difference in the number of shuttles, robots or lifts the project has to buy. The order release and batching rules in the WMS change the investment as much as the choice of hardware.
Not every item belongs in the system. The tote is the unit of work: items that do not fit in it, and orders picked in full cases, stay in a conventional zone. Fast movers carry a second cost, because every refill also uses the system. An item that sells 300 units a day from a tote holding 60 needs five refills a day, and each refill is a trip to the decanting station and back: ten tote movements a day that serve no order. For such items a flow rack in a manual zone next to the G2P system can be cheaper, and the split between the zones is worth calculating item by item from the order profile rather than setting by product category.
Logio designs G2P solutions in automated warehousing projects, from the order profile and the split between automated and manual zones to the number of stations and the batching rules, and tests the variants in dynamic simulation before the tender.
Related terms
More supply chain insights

Supply chain glossary
Cross‑Docking
What cross‑docking is, how pre‑allocated and post‑allocated variants differ, and why it moves safety stock from the distribution center to the stores.
19. november 2026
3 min

Whitepapers & ebooks
Vendor‑Managed Inventory: When Handing Replenishment to the Supplier Pays Off, and When It Backfires
Vendor‑managed inventory moves ordering to the supplier but does not remove stock from the chain on its own. When VMI pays off for a retailer, when it backfires, and what to settle before signing.
19. november 2026
10 min

Supply chain glossary
Slotting
What warehouse slotting is, why items are ranked by pick lines rather than units sold, and how location size sets the number of replenishment trips.
18. november 2026
3 min